Grundfos Hydro Multi-E Series User Manual

Declaration of conformity
49
— Machinery Directive (2006/42/EC).
Standard used: EN 809: 1998 + A1: 2009.
— Radio Equipment Directive (2014/53/EU)
Standards used: EN 61800-5-1:2007, EN 61800-3:2004+A1:2012,
EN 62479:2010, EN 301 489-1 V2.2.0, EN 301 489-17 V2.2.1, EN
300 328 V1.9.1, EN 301 511 V12.1.10, EN 301 489-1 V2.2.0, EN 301
489-7 V1.3.1
— ErP Directive (2009/125/EC)
Motors:
Commision Regulation (EC) No 640/2009
Standards used: EN 60034-2-1:2007
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI. See pump nameplate.
—
This EC/EU declaration of conformity is only valid when published as part
of Grundfos installation and operating instructions (publication number
98491894)
Bjerringbro, 6th April 2017
Frank Skovgaard
Senior Manager
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
Person authorised to compile technical file and
empowered to sign the EC declaration of conformity.

Grundfos Hydro Multi-E Series Specifications

General

Brand	Grundfos
Model	Hydro Multi-E Series
Category	Water Pump
Language	English