Main Menu
Parameters
( 15 )
Diagnostics
STOP READY I/O
ID: M1
( 7 )
Monitor
( 6 )
ID:
Choose action
STOP Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
STOP READY Keypad
( 6 )
Keypad Reference
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
ID:184
Keypad
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
STOP READY Keypad
( 6 )
ID:168
Keypad Reference
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
F T
TM078668
Accessing Control page
6.1.5.7 Changing direction
Rotation direction of the motor can quickly be
changed by applying the FUNCT button.
Changing direction command is not visible
in the menu unless the selected control
place is Local.
1. Anywhere in the menu structure, push the FUNCT
button.
2. Push the Arrow up or the Arrow down button to
select Change direction and confirm with the OK
button.
3. Then choose the direction you wish to run the
motor to. The actual rotation direction is blinking.
Confirm with the OK button.
4. The rotation direction changes immediately and
the arrow indication in the status field changes.
Main Menu
Parameters
( 15 )
Diagnostics
STOP READY I/O
ID: M1
( 7 )
Monitor
( 6 )
ID:
Choose action
RUN Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
ID:
Choose action
RUN Ready Keypad
ID:1805
Forward
Reverse
Main Menu
Parameters
( 15 )
Diagnostics
STOP READY I/O
ID: M1
( 7 )
Monitor
( 6 )
F CT
O O
TM078669
6.1.5.8 Quick edit
Through the Quick edit functionality you can quickly
access the desired parameter by entering the
parameter's ID number.
1. Anywhere in the menu structure, push the FUNCT
button.
2. Push the Arrow up or the Arrow down buttons to
select Quick Edit and confirm with the OK button.
3. Then enter the ID number of parameter or
monitoring value you wish to access. Press OK
button to confirm.
4. Requested Parameter/Monitoring value appears
on the display (in editing/monitoring mode.)
43
English (GB)
To Next Page
Loading...
