Grundfos RSI - Page 73

Menu and Parameter group Description
Group 3.22: Solar Solar specific function parameters
Group 3.23: Flow meter Flow meter parameters
Group 3.24: Dual Supply Dual Supply parameters
8.1.1 Column explanations
Code = Location indication on the keypad; Shows the operator the parameter number.
Parameter =
Name of parameter
4)
Min = Minimum value of parameter
Max = Maximum value of parameter
Unit = Unit of parameter value; Given if available
Default = Value preset by factory
ID = ID number of the parameter
Description = Short description of parameter values or its function
4)
When the name of the parameter is written in italic, more information is available about the parameter. Click the parameter
name.
8.1.2 Group 3.1: Motor settings
Group 3.1.1: Motor nameplate
Code Parameter Min Max Unit Default ID Description
P3.1.1.1 Motor Nom Voltg Varies Varies V Varies 110
Find this value U
n
on the
rating plate of the motor.
Note also used connection
(Delta/Star).
P3.1.1.2 Motor Nom Freq 8.00 320.00 Hz Varies 111
Find this value f
n
on the
rating plate of the motor.
P3.1.1.3 Motor Nom Speed 24 19200 rpm Varies 112
Find this value n
n
on the
rating plate of the motor.
P3.1.1.4 Motor Nom Currnt Varies Varies A Varies 113
Find this value I
n
on the
rating plate of the motor.
P3.1.1.5 Motor Cos Phi 0.30 1.00 0.74 120
Find this value on the rating
plate of the motor
P3.1.1.6 Motor Nom Power Varies Varies kW Varies 116
Find this value In on the
rating plate of the motor.
73
English (GB)