22
E-mail server
In the e-mail Server section, enter the access data for your e-mail account.
By convention, SMTP servers have received requests through port 25. However, in
order to reduce spam, newer servers can also use port 587 for the receipt of e-mails
addressed to authenticated users that are to be submitted to other mail servers.
An alias name can be given to the Digta W/LAN-Adapter, which will be displayed as
the Sender name when the e-mail is sent.
E-mail recipient
If dictations are to be sent to a fixed address, activate
“E-mail recipient address configured” and enter the e-mail destination address in
the field.
Test e-mail/Settings
The “Test e-mail” button is used to carry out a connection test using the settings
made before they are saved. A symbol near the button shows whether this test has
been successful (green) or not (red).
During this test an e-mail containing the IP address, interface and MAC address of
the Digta W/LAN-Adapter is sent to the configured recipient.
To save the settings permanently, click on the “Apply” button.
To Next Page
Loading...
