27
Transfer of dictations
Dictate in your usual way with the Digta. To transfer dictations from the device,
connect the Digta, while switched on, to the docking station. Depending on the
configuration of the Digta, the USB file transfer mode starts immediately or must be
activated manually (consult your Digta´s user guide). All dictations from all folders,
except files with “Postponed” status, are now transferred.
The dictation device beeps once to indicate the end of the transfer. Only then should
the Digta be removed from the docking station or USB cable. Two beeps indicate
that there has been an error in transfer.
If there is a LAN connection this will be used as a priority for the transfer. If no LAN
connection can be established, the wireless LAN connection is activated and used
for the transfer (if configured, see chapter “WLAN (optional)”).
d
TIP
Only dictations made directly using a Digta can be transferred in the
DSS/DSS Pro, WAV and MP3 format.
To Next Page
Loading...
