Grundig VISION 6 26-6840 T - Decoder or satellite receiver

40
Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
1 Connect the »SCART« socket on the television set and the ap-
propriate socket on the decoder using a EURO-AV cable.
Using a decoder or satellite receiver
1 Switch on the television and the decoder or the satellite receiver.
2 Press »AV«, select the channel »SCART« with » V « or » Λ « and
press »
G« to confirm.
Activating the preset for a decoder
If this function is activated, the decoder (connected to the »SCART«
socket) provides a decoded audio/video signal.
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select »OPTIONS« with »
–
« or »
+
« and press »G« to confirm.
3 Select the »Decoder Settings« with » V « or » Λ «.
4 Press »
–
« or »
+
« to switch the function (»On«).
5 Press »i« to end the setting.
USING EXTERNAL DEVICES
----------------------------------
Decoder
OPTIONS
Language Settings
Restore Factory Defaults
Country Deutschland
Game Mode Off
Decoder Settings Off
Select
Back
Exit
s
s
Z
1
SPDIF Output PCM