Need help?Do you have a question about the GSi 18 and is the answer not in the manual?
General| Brand | GSi |
|---|---|
| Model | 18 |
| Category | Measuring Instruments |
| Language | English |
Specifies the discrete frequencies and accuracy of the GSI 18 audiometer.
Details the intensity ranges, accuracy, and signal-to-noise ratio for the GSI 18.
Information on AC power supply and battery types for operating the GSI 18.
Operating and storage conditions for the GSI 18, including temperature and humidity.
Physical dimensions and weight of the GSI 18 unit.
Instructions for checking the GSI 18 upon arrival and initial inspection procedures.
Guidelines for the proper recycling and disposal of the GSI 18 and its electronic components.
Step-by-step guide for setting up and connecting the GSI 18 audiometer.
Identifies and explains the purpose of each connector on the rear panel of the GSI 18.
Details the components and labels located on the bottom of the GSI 18 unit.
Explains the functions of the front panel controls and indicators on the GSI 18.
Describes the icons, LEDs, and numerical displays on the GSI 18's LCD screen.
Information on using the AC power supply, including connection and disconnection for the GSI 18.
Covers battery use, types, capacity, and low battery indication for the GSI 18.
Step-by-step guide on how to properly remove batteries from the GSI 18.
Instructions for correctly inserting new batteries into the GSI 18 battery compartment.
Steps to perform before starting audiometric tests with the GSI 18.
Importance of subject recovery from noise exposure before conducting hearing tests.
Guidelines for selecting an appropriate and quiet environment for accurate audiometric testing.
How to effectively communicate test procedures and expectations to patients.
Proper techniques for positioning earphones on the patient for reliable test results.
Information on using the optional response handswitch for patient feedback during tests.
Details the structure and use of the GSI 18 audiogram form for recording test data.
Procedures for conducting standard audiometric tests using the GSI 18 unit.
How to choose between headphone and insert earphone transducers for testing.
Explanation of the Hearing Level (HL) knob for setting stimulus intensity levels.
How to use the +10 dB button to extend stimulus intensity limits for testing.
Options for selecting tone types (steady, pulsed, FM) for test presentation.
Overview of a standard audiometric testing session workflow and steps.
Steps for reviewing and preparing the subject and equipment for the test session.
Procedures for familiarizing the subject with test tones and the testing process.
Method for finding the patient's hearing threshold using pure tone stimuli.
Recommended sequence and steps for conducting pure-tone audiometric tests.
General recommendations for maintaining the GSI 18 and headset to maximize service life.
Instructions for cleaning the exterior surfaces of the GSI 18 unit.
Recommended agents for cleaning and disinfecting audiometric equipment and parts.
How to clean parts that come into direct contact with the patient for hygiene.
Procedures for performing biological calibration checks to ensure accuracy.
How to check for wear and damage on earphone cords that may affect signal integrity.
Steps to detect and address hum or random noise issues affecting test accuracy.
How to check for sound distortion or frequency inaccuracies in the GSI 18 output.
Explains error messages displayed on the GSI 18's LCD screen and their meaning.
Description of the 'CAL' message indicating a calibration error on the GSI 18.
Explanation of 'Exx' error codes and troubleshooting steps for GSI 18 system errors.
To Next Page
