EasyManua.ls Logo

GSi JK300HP User Manual

GSi JK300HP
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
JK300HP/JK300P/JK125P
Nd: YAG Industrial Laser
Pre-installation and User Manual
GSI Group - Laser Division
Cosford Lane, Swift Valley
Rugby, Warwickshire, CV21 1QN
England
Telephone: 44 (0) 1788 570321
Fax: 44 (0) 1788 579824
www.gsig.com
Petitioners Canadian Solar Inc. and Canadian Solar (USA) Inc.
Ex. 1025, p. Cover

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the GSi JK300HP and is the answer not in the manual?

GSi JK300HP Specifications

General IconGeneral
Resolution0.1dB
Power Supply9V Battery
TypeHandheld Sound Level Meter
Measurement Range30 dB to 130 dB
Operating Temperature0°C to 40°C
Operating Humidity10~90%RH

Summary

Safety

Laser Classification

Defines laser product classifications and associated risks per IEC 60825-1.

Laser Radiation Hazards

Details effects of laser radiation on body tissue and eyes, including Nd:YAG specifics.

Control Measures

Lists measures to minimize personal injury from laser radiation exposure.

Electrical Safety

Outlines precautions for working with high voltage power supplies.

Environmental Hazards

Discusses hazards from fire, fume, compressed gases, and solvents.

Conditions of Use

Specifies conditions for safe and proper laser system operation.

Safety Control System

Describes the system for implementing safety precautions.

Training

Highlights the necessity of completed training for laser system operators.

Personal Protective Equipment

Discusses the use of appropriate PPE, especially eye protection.

Pre-installation

Site Preparation

Details requirements for electrical supply and cooling water.

Environmental Conditions

Covers temperature and humidity requirements for operation.

Electrical Connections

Details connection panels and specific connector descriptions.

Pre-installation Checks

Provides a checklist for site preparation and requirements.

Installation

Installation Procedure

Outlines the steps and duration for system installation and training.

Installation Procedures

Lists procedures undertaken by the installation engineer.

De-Commissioning

Disconnect Power Supply

Details the procedure for safely disconnecting the power supply.

Connector Removal

Lists connectors to be removed during de-commissioning.

Disconnect External Water Supply

Outlines steps to safely disconnect the external water supply.

Drain Internal Cooling System

Provides instructions for draining the internal cooling system.

Fibre Removal

Details the procedure for safely removing fibre optic cables.

Laser Operation

Laser Start-up

Describes the power-on sequence for the laser system.

Laser Shut-down

Explains the power-off sequence for the laser system.

Emergency Shutdown

Details the procedure for emergency shutdown in critical situations.

OPERATE screen

Details the function of the OPERATE screen for manual laser operation.

SETUP screen

Explains how to set up the laser for manual operation.

MODIFY SHAPE screens

Describes screens for defining 2-sector shapes.

Energy MONITOR screen

Details the function of the Energy Monitor screen.

Alarm and Warning Handling

Optimisation

User Maintenance

Laser Processing

Related product manuals