The GSI 18 is designed for compliance to IEC and UL 60601-1 when used in the
patient vicinity. The GSI 18 is equipped with a specific power transformer (pn:
UE100503HKKK3-P), which should not be interchanged with any other
transformer or supply.
Any program aimed at obtaining reliable records of hearing thresholds should be
staffed and supervised by appropriately-trained individuals.
Latex is not used anywhere in the manufacturing process.
The base material for the earphone cushions is made from natural and synthetic
rubber.
1718-0100 Rev. E
In this manual the following two labels identify potentially dangerous or
destructive conditions and procedures:
The
label identifies conditions or practices that may present danger to
CAUTION
The CAUTION label identifies conditions or practices that could result in damage to
the equipment.
NOTE: Notes help you identify areas of possible confusion and avoid potential
problems during system operation.
WARNING