This product and its components will perform reliably only when operated and
maintained in accordance with the instructions contained in this manual,
accompanying labels, and/or inserts. A defective product should not be used.
Parts which may be broken or missing or are visibly worn, distorted or
contaminated should be replaced immediately with clean, genuine replacement
parts manufactured by or available from GSI.
The responsibility of GSI for a malfunction product is limited by the warranty set
forth in this manual. Should repair or replacement of this product become
necessary after the warranty period, the customer should seek advice from GSI
Technical Support prior to such repair or replacement. If this product is in need of
repair, it should not be used until all repairs have been made and the unit is
functioning properly and ready for use. The owner of this product has sole
responsibility for any malfunction resulting from improper use or maintenance, or
repair by anyone other than GSI, and from any malfunction caused by parts that
are damaged or modified by anyone other than GSI.
This product should not be used in the presence of fluid that can come into
contact with any of the electronic components or wiring. Should the user suspect
fluids have contacted the system components or accessories, the unit should not
be used until deemed safe by a GSI certified service technician.
Do NOT use in the presence of flammable gaseous mixtures. Users should
consider the possibility of explosions or fire when using this device in close
proximity to flammable anesthetic gases.
Periodically, have a service technician perform electrical safety checks on the unit
in order to maintain continued compliance to IEC and UL 60601-1.
v 1718-0100 Rev. E
GSI 18
Customer Responsibility
To Next Page
Loading...
Need help?
General
