EasyManuals Logo

GSi ALLEGRO User Manual

GSi ALLEGRO
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
GSI
Allegro Tympanometer
User Manual
D-0120695 Rev D 2022-06 Page 7
HANDSET
Press the On/Off key momentarily to turn the GSI Allegro on (refer to the diagram above). No
warm-up time is required, although a short diagnostic routine will run for a few seconds. During
this time the internal pump will operate. To switch off, again press and hold the On/Off key for a
few seconds.
Press the up and down navigation keys to scroll through the menus or set values
Press the right navigation key to accept a menu choice or go to the next step.
Press the left navigation key to cancel an operation or go back to the previous step.
The function of the left and right keys is usually shown on the bottom line of the display.
When not located in the cradle and not performing a test the GSI Allegro will switch off
automatically if no key is pressed for 90 seconds. This time may be extended to 180 seconds in
the CONFIGURATION menu.
Probe
LED
Indicators
LCD
Display
Navigation
Keys
On/Off
Key

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GSi ALLEGRO and is the answer not in the manual?

GSi ALLEGRO Specifications

General IconGeneral
BrandGSi
ModelALLEGRO
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals