GSI
Allegro Tympanometer
User Manual
D-0120695 Rev D 2022-06 Page 41
Number of reflex levels (see Acoustic
Reflex Measurement)
Four: 100dB with 5dB or 10 dB steps; 95dB, 90dB
or 85dB with 5 dB steps
Reflex pass/fail at each level tested; maximum
amplitude of each reflex (seen on printed report
& computer report); pressure at which reflex was
performed
Pressure used for reflex measurement
Pressure at Tympanogram peak, or 0 daPa
Optionally, Auto-stop when reflex found
Number of records stored in Patient
Database
Any recording can be stored once the
tympanogram is viewed. Patient Initials (A-Z, 0-9,
“-“) must be entered before storage.
Patient Initials, Tympanogram and Reflex graphs
and analysis for Left Ear and/or Right Ear, Time
and Date of recording, which ears were tested,
whether or not the record has been printed
and/or sent to a computer, parameters used for
analysis, 128 bit Globally Unique Identifier (GUID)
Records listed in reverse chronological order
(latest first), with indication of data stored as
described above
Time and date stamp applied to all recordings,
and to the last calibration date