Chapter 2: Installation
External Inspection
Although this GSI Pello Audiometer was carefully tested, inspected, and packed
for shipping, it is good practice after receiving the instrument to immediately
examine the outside of the container for any signs of damage. Notify the carrier if
any damage is observed.
Unpacking
Carefully remove the GSI Pello from its shipping container. If the instrument
appears to have suffered any damage, notify the carrier immediately so that a
proper claim can be made. Be certain to save all packing material so that the
claim adjuster can inspect it as well. As soon as the carrier has completed the
inspection, notify a Grason-Stadler representative.
If the instrument must be returned to the factory, repack it carefully in the
original container, (if possible) and return it prepaid to the factory for the
necessary adjustments.
Check that all accessories are received in good condition. If any accessories are
missing, a Grason-Stadler representative should be notified immediately.
NOTE: Refer to the supplied accessories list below to ensure that all accessories
and cables have been included in the shipment.
To Next Page
Loading...
Need help?
General
