GSi PELLO - Side Panel Connector Identification; Right Side Panel Controls; Left Side Panel Connector Identification

Right Side Panel
The power switch is located on the right side panel.
NOTE: Do not block access to the power switch.
Left Side Panel
The following connectors will be visible on the left side panel
of the GSI Pello:
Connection
Description
Graphic
Monitor Headset
3.5 mm stereo jack
Monitor microphone
Headphones
3.5 mm stereo jack
Monitor speaker
USB Port The Pello is equipped with four (4) USB A and one (1) USB B ports. It is
possible to connect external devices such as mouse, keyboard, or external printer
to be used with the audiometer. Additionally, a memory stick may be inserted
into a USB port for updating software, adding additional sound files, license
updates, printing to PDF or exporting diagnostic log files.
NOTE: Scan files on a USB drive for viruses prior to installing the drive into the
instrument.
A/B Cable Remote connection to an external computer is achieved through the use of a
standard A/B USB cable.
NOTE: It is recommended to always have the USB ports enabled on the PC.
Disable the “suspend USB” option on the PC.