5. Assembly
38 PNEG-750-G2 16" Series II Sweep 131' and 135' Diameter
Motor Jack and Base Assembly
A. Attach the motor mount base assembly to the head section using four (4) 3/4" x 2" bolts,
lock washers and hex nuts. (See Figure 5V.)
B. Attach the motor jack assembly to the motor mount base assembly using four (4) 1/2"-13 x 1-1/2"
bolts, 1/2" flat washers and 1/2" hex nuts.
Figure 5V
To Next Page
Loading...