Fitting and replacing the blade
The trimmer has a removable plastic blade that can be replaced with a new blade
quickly and easily.
WARNING : do not attempt to remove the blade while the unit is running.
Wait until the blade has stopped before attempting to remove the blade.
Never t metal blades.
Only t blades recommended by the manufacturer.
To t the blade :
Place the blade over blade retaining pin, then pull the blade outwards to lock into
position.
blade retaining pin
To remove the blade :
Push the blade toward the centre of the trimmer and lift off the blade retaining pin.
Warning : only t blades recommended by the manufacturer.
Replacement blades can be purchased from Grey Technology Ltd
Tel 0870 7944001 or online at www.greytechnology.co.uk
10
Gtech helpline: 0870 7944001 email: support@greytechnology.co.uk
www.greytechnology.co.uk
To Next Page
Loading...
