Assist handle adjustment
The angle and reach of the assist handle can be adjusted to your preference.
WARNING : do not attempt to adjust the assist handle whilst the blade is
rotating.
Adjusting the assist handle:
Loosen the knob on the side of the handle.
Slide the handle along the tube and adjust the angle of the handle to a position
which is most comfortable.
Tighten the knob to x the assist handle in the new position.
Loosen Knob
12Gtech helpline: 0870 7944001 email: support@greytechnology.co.uk
www.greytechnology.co.uk
To Next Page
Loading...
