14
11.4.2 USER CODE TABLE
Enter your codes in this table and keep in a safe place.
USER
NO.
CODE USER
1 1234 DEFAULT MASTER CODE
1 NEW MASTER CODE
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16 DURESS CODE
11.4.3 THE DURESS CODE (USER CODE 16)
The duress code is a special 4-digit user code that is only used in the unique
situation where an intruder forces a user to unset the panel "under duress".
When the duress code is entered the control panel unsets normally, however, a
DURESS REPORTING CODE is transmitted to the monitoring station to inform
them that a user has been forced to unset the control panel by an intruder.
If a duress code is entered in the unset condition, a DURESS REPORTING CODE
is again transmitted, however the event is not logged.
It is advisable to choose a code that can be easily remembered by all family (or
staff) members.
To Next Page
Loading...