Guardall PX18 - Code Change; Logon;Set

PX Control Panel User Manual – Issue C
- 26 -
The menu options available to each authority level are shown in the table.
Menu Option User Authority Level
Code Text Man Ord Set/
Uns
Set Unset Cleaner Access Reset Duress
01 Unset
3 3 3 7 3 3 7 7 3
02 Set
3 3 3 3 7 3 7 7 7
03 Reset
3 3 3 7 7 7 7 3 3
04 Test
3 3 7 7 7 7 7 7 7
05 Engineer 1 1 1 1
7 7 7 7 7
06 Code
3
2 2 2
7 7 7 7
2
07 User
3 7 7 7 7 7 7 7 7
10 Log-Full
3 7 7 7 7 7 7 7 7
11 Log-Cct
3 7 7 7 7 7 7 7 7
12 Log-User
3 7 7 7 7 7 7 7 7
13 Log-KP
3 7 7 7 7 7 7 7 7
14 Log-Date
3 7 7 7 7 7 7 7 7
15 Log-Alarm
3 7 7 7 7 7 7 7 7
16 A/Log-Full
3 7 7 7 7 7 7 7 7
17 A/Log-User
3 7 7 7 7 7 7 7 7
18 A/Log-Door
3 7 7 7 7 7 7 7 7
20 Time +/-75m 3 3
7 7 7 7 7 7 7
24 Holiday
3 7 7 7 7 7 7 7 7
25 Schedule
3 7 7 7 7 7 7 7 7
26 Set Group
3 7 7 7 7 7 7 7 7
30 Bypass 4 4
7 7 7 7 7 7 7
31 KP Off
3 7 7 7 7 7 7 7 7
32 Chime
3 3 7 7 7 7 7 7 7
40 Print Text
3 7 7 7 7 7 7 7 7
42 Print Hols.
3 7 7 7 7 7 7 7 7
50 Add User
3 7 7 7 7 7 7 7 7
51 Delete User
3 7 7 7 7 7 7 7 7
52 IdentifyUser
3 7 7 7 7 7 7 7 7
53 Door Unlock
3 7 7 7 7 7 7 7 7
54 Door Lockout
3 7 7 7 7 7 7 7 7
55 Door Text
3 7 7 7 7 7 7 7 7
71 Copy User
3 7 7 7 7 7 7 7 7
73 Copy A/User
3 7 7 7 7 7 7 7 7
86 Isolate Cct 5
7 7 7 7 7 7 7 7
87 Isolate Conc 5
7 7 7 7 7 7 7 7
89 Cct Status
3 7 7 7 7 7 7 7 7
Notes: Items marked 1-5 will only be available if programmed by the installation engineer.
User Authority Menu
Code Change
On/Off
Some user types are allowed by default to change their own code (refer to authority table). This feature
can be disabled for any user without manager authority.
User Authority Menu
LogOn/Set
On/Off
If this option is on, a set prompt will be displayed in place of the normal log on menu, when the user logs
on. If the user has only the set option available then either a list of the groups, which can be set, will be
Intelligent Security & Fire Ltd