PX Control Panel User Manual – Issue C
- 43 -
Add User
Code-50
When the Add User option is selected, the first free user number will be selected by the system and
the normal user programming menu will be displayed.
User xxxx
Present Card/Fob Present the card or fob for the new user
The user authority is automatically set to Access for all doors and the user text descriptor will be
defaulted.
Delete User
Code-51
When the Delete User option is selected, a range must be entered:
Delete User
Frst ____ Lst ____ Enter the first and last users number in the range 2-max user
Identify User
Code-52
This option allows a user to be identified by presenting the card/fob.
Present Card/Fob Present the token or press 7to exit.
If the card/fob is not used then a message will be displayed.
Code Not Used Present another token or press 7to exit.
If the token is used then a message will be displayed.
User X The user number
“User Descriptor”
Further card/fobs may be presented and identified at any stage.
Door Unlock
Code-53
Enter the door number:
Door Lock Menu Options
Door-nn
Door Unlock-Off On/Off
A door can be manually unlocked from a keypad. The door unlock off command is required to lock the
door after indefinite unlock. If the door is locked it can still be opened by presenting a valid user card.
Intelligent Security & Fire Ltd
To Next Page
Loading...
