Guardian DCR2 User Manual

13
Programming The Transmitter
1. To program a transmitter, press “RADIO SET” button, “OK” LED flashes twice.
The unit is ready to accept a transmitter within a 30 seconds time frame.
2. Press any button on the transmitter within 30 seconds.
3. “OK” LED flashes once and operator beeps twice, acknowledging the transmitter is
set.
x2
To DELETE ALL transmitters:
Press and hold “SET” button for about 7 seconds until “OK” LED flashes and
beeps twice.
UP RADIO SET
FORCE
UP RADIO SET
FORCE
UP RADIO SET
FORCE

Guardian DCR2 Specifications

General

Brand	Guardian
Model	DCR2
Category	Garage Door Opener
Language	English