SAVE/RECALL
151
Create/Edit file labels
Reference files and Setup files stored in internal
memory can have individual labels set. The labels
are used on the reference waveform and setup file
icons.
1. Press the Save/Recall key from the
front panel.
2. Press Edit File Label from the
bottom menu.
3. Press Label For to choose a
Reference or Setup file.
4. To choose a preset label, Press User
Preset from the side menu and
choose a label.
ACK, AD0, ANALOG, BIT, CAS,
CLK, CLOCK, CLR, COUNT,
DATA, DTACK, ENABLE, HALT,
INT, IN, IRQ, LATCH, LOAD,
NMI
1. Press Edit Character to edit the
current label.
To Next Page
Loading...
