GW Instek GDS-3152 - Web Server; USB;RS-232 C Remote Control Software; Web Server Overview

GDS-3000 Series User Manual
184
USB/RS-232C Remote Control Software
Terminal
Application
(USB/RS-232C)
Invoke the terminal application such as telnet. For
RS-232C, set the COM port, baud rate, stop bit,
data bit, and parity accordingly.
To check the COM port No, see the Device
Manager in the PC. For WinXP, Control panel →
System → Hardware tab.
Functionality
Check
Key in this query command via the terminal.
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version in
the following format.
GW, GDS-3152, EK0000001, V1.00
Note: remember to use the appropriate terminal
character when entering the command.
PC Software
(USB only)
The proprietary PC software FreeWave is
downloadable from the GWInstek website for
remote control.
Web Server
Web Server Overview
Background
The GDS-3000 has an inbuilt web server that can
be used to:
 view the system information (Welcome Page)
 set/view the network configuration settings
(Network Configuration)
 remotely view the current display image on the
unit (Get Display Image)