GW Instek PSU 150-10 - UART Function Check

COMMUNICATION INTERFACE
169
UART Function Check
Functionality
check
Invoke a terminal application such as Realterm.
To check the COM port No, see the Device
Manager in the PC. For WinXP; Control panel →
System → Hardware tab.
Run this query command via the terminal
application after the instrument has been
configured for either RS232 or RS485 remote
control (page 165).
SCPI commands
Command or response
Status
*IDN?
Typing
GW-INSTEK,PSU40-38,TW123456,
T0.01.12345678
Return
Return the manufacturer, model, serial
number, and firmware version in the
above format.
Manufacturer: GW-INSTEK
Model: PSU40-38
Serial number: TW123456
Firmware version: T0.01.12345678
Note