GW Instek PSW 30-108 - Page 38

PSW Series User Manual
38
4. Slide the cover off the AC
terminals.
5. Remove the AC power
cord wires.
5
4
Installation
1. Connect the AC power
cord wires to the AC input
terminals.
 White/Blue  Neutral
(N)
 Green/Green-
yellowGND ( )
 Black/Brown  Line
(L)
LN
Line
Neutral
Ground
2. Set the cover back over the
AC terminals.
2
3. Re-install the power cord
cover.
4. Screw the power cord
sheath back onto the cover.
3
4
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com