GW Instek PSW 30-108 - Load Test Script from USB

PSW Series User Manual
90
4. Rotate the Current knob to choose
a memory number.
Current
Range
1~10
5. Press the Voltage knob to complete
the setting.
Voltage
Exit
Press the Test key again to exit the
Test settings. The Test key light
will turn off.
Test
Load Test Script from USB
Overview
Before a test script can be run, it must first be
loaded into a one of the 10 memory save slots.
Before loading a test script into memory:
 Ensure the script file is placed in the root
directory.
 Ensure the file name number corresponds to
the memory number that you wish to save
to.
For example: A test file named t001.tst can
only be saved to memory number 01, t002.tst
can only be saved to memory number 02,
and so on.
Steps
1. Insert a USB flash drive into the
front panel USB-A slot. Ensure the
flash drive contains a test script in
the root directory.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com