GW Instek PSW 30-72 - Page 43

REMOTE CONTROL
43
13
12
14. Click Configuration icon.
15. In the I/O Settings tab, select the Enable
Termination Character check box. Ensure Line
Feed - \n is selected as the line feed character.
16. Click Apply Changes.
14
15
16
17. Click the Input/Output icon.
18. Ensure *IDN?\n is selected in the Select or Enter
Command dropdown text box.
19. Click the Query button.
20. The *IDN? query should be returned to the
buffer area:
GW-INSTEK,PSW250-9,,01.54.20140313\n