11
Troubleshooting flowchart
Figure 5 Troubleshooting an ACL application failure
Solution
To resolve the issue:
1. Execute the display qos-acl resource command, and then check the Remaining field for
ACL resources insufficiency.
If this field displays 0, the ACL hardware resources are exhausted.
2. To free hardware resources, delete unnecessary ACLs.
3. If the issue persists, contact H3C Support.
ACL application failure without an error message
Symptom
The system applies a packet filter or an ACL-based QoS policy to the hardware. However, the ACL
does not take effect.
To Next Page
Loading...
Need help?
General