H3C UniServer R4900 G3 User Manual

10
Figure 12 Setting the RAID level
4. On the screen as shown in Figure 13, select Select Drives From to set the drive capacity
source, and then press Enter.
 Unconfigured Capacity—The capacity source is the unconfigured drives.
 Free Capacity—The capacity source is the remaining drive capacity.
Figure 13 Setting the drive capacity source
5. On the screen as shown in Figure 14, select Select Drives and press Enter.

H3C UniServer R4900 G3 Specifications

General

Brand	H3C
Model	UniServer R4900 G3
Category	Server
Language	English