H3C UniServer R4900 G3 User Manual

17
Configuring hot spare drives
CAUTION:
With
hot spare drives configured, if a RAID level is degraded due to drive failures, hot spare drives
replace the failed drives automatically
. The system starts RAID rebuilding automatically after
accessing the OS.
1. On the RSTe configuration screen, select Mark Disks as Spare, and press Enter.
Figure 25 RSTe configuration screen
2. Select a drive for hot spare, press SPACE, and then press Enter. On the prompt that opens,
enter y and press Enter.
Figure 26 Selecting a drive for hot spare
3. View the configured hot spare information on the RSTe configuration screen.

H3C UniServer R4900 G3 Specifications

General

Brand	H3C
Model	UniServer R4900 G3
Category	Server
Language	English