19
Configuring dedicated hot spare drives
1. On the storage controller configuration screen, select Logical Device Configuration >
Manage Arrays, and press Enter.
2. On the screen as shown in Figure 28, select the RAID array for which you want to configure
dedicated hot spare drives, and press Enter.
Figure 28 Selecting a RAID array
3. On the screen as shown in Figure 29, select Failover Assignments, and press Enter.
Figure 29 Selecting Failover Assignments
4. On the screen as shown in Figure 30, select Add Spares, and press Enter.
To Next Page
Loading...
Need help?
General
