To Next Page

To Previous Page

Figure 98 Integrating an OS image and a storage controller driver

Installing the OS

1. Enter BIOS and select boot options:

{

For H3C UniServer R4900/4700/2900/2700 G3, enter the BIOS Setup Utility, select a boot

option in the Save & Exit tab, and then press Enter. This example selects UEFI:AMI

Virtual CDROM0 1.00.

Figure 99 Selecting a boot option

{

For H3C UniServer R6900 G3, enter the Front Page, in the Boot Manager, select a boot

option, and then press Enter. This example selects EFI USB Device(AMI Virtual

CDROM0.

H3C UniServer R6900 G3 Operating System Installation Guide

Other manuals for H3C UniServer R6900 G3