179
Item Descri
tion
Short Retry Threshold
Number of retransmission attempts for unicast frames smaller than the
RTS/CTS threshold if no acknowledgment is received for it.
Max Receive Duration Interval for which a frame received by an AP can stay in the buffer memory.
Configuring data transmit rates
NOTE:
Support for this feature depends on the device model. For more information, see "Feature matrix."
Configuring 802.11a/802.11b/802.11g rates
1. Select Radio > Rate from the navigation tree.
Figure 177 Setting 802.11a/802.11b/802.11g rates
2. Configure 802.11a/802.11b/802.11g rates as described in Table 69.
3. Click Apply.
To Next Page
Loading...
Need help?
General
