Hach sensION MM340 - 3.2 Connect to AC power

3.2 Connect to AC power
The meter can be powered by AC power with the universal power
adapter.
1. Select the correct adapter plug for the power outlet from the adapter
kit.
2. Connect the universal power adapter to the meter (Figure 2).
3. Connect the universal power adapter to an AC receptacle (Figure 3).
4. Turn the meter on.
Figure 2 Connector panel
1 Magnetic stirrer 1 connector,
Channel 1
7 PC keyboard, mini DIN connector
2 Reference electrode (separated
electrodes) connector, Channel 2
8 Temperature probe connector,
Channel 1
3 Reference electrode (separated
electrodes) connector, Channel 1
9 Combined pH electrode (or
indicator) connector, Channel 1
4 Separated temperature probe
connector, Channel 1
10 Combined pH electrode (or
indicator) connector, Channel 2
5 RS-232 for printer or PC connector 11 Magnetic stirrer 2 connector,
Channel 2
6 Power supply
Figure 3 AC power connection
Note: Position the equipment so it is not difficult to disconnect power to the
equipment.
English 7