Option Description
Options Sets the following options:
• Set the application parameters view to expert or basic mode
• When the instrument is set to off, sets the syringe to empty into the
titrant bottle
• Changes the temperature display unit
• Prints the measurement and derivative curves if a printer is connected
• Specify if a balance is connected
• Specify if an external propeller stirrer is connected.
Note: When the instrument is set to on, the application parameters view is
always set to basic mode. Changes made to application data with the
instrument in expert mode are kept.
Security Change the password. Specify which of these options are password
protected:
• Settings (all items except Info)
• Maintenance schedule and summary
• Delete data log
• Export data log
• Electrode calibration
• Titrant calibration
• Sample volume calibration
• Syringe verification test
3. Push Back.
Configure the instrument
76
To Next Page
Loading...
