Why is my Haier HW100-B14979 Washer constantly draining water?
If your Haier Washer is draining, it might be because the drain hose is installed at an incorrect height (below 80 cm) or the drain hose end is submerged in water. Ensure that the drain hose is properly installed and is not in water.
What to do if my Haier HW100-B14979 Washer fails to operate?
If your Haier Washer fails to operate, several factors could be at play. First, ensure that you've started the programme correctly and that the door is securely closed. Then, verify that the machine is switched on and that there is no power failure. Finally, check if the child lock is activated and deactivate it if necessary.
Why is my Haier HW100-B14979 Washer spinning failing?
Spinning may fail in your Haier Washer because of an unbalance of laundry. Check the machine load and laundry, then run a spinning programme again.
How to prevent excessive foam in my Haier HW100-B14979's detergent drawer?
If you observe excessive foam in the detergent drawer of your Haier Washer, it could be due to using an inappropriate detergent or using too much detergent. Check the detergent recommendations and reduce the amount of detergent used.
What to do if my Haier HW100-B14979 stops mid-cycle?
If your Haier Washer cycle stops before completing, the issue might be related to the water or electric supply. Check both the power and water supply to ensure they are functioning correctly.
What does error code 'E4' mean on my Haier HW100-B14979 Washer?
If your Haier Washer displays 'E4', it means the water level was not reached after 12 minutes or the drain hose is self-syphoning. Make sure that the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
Why is my Haier HW100-B14979 vibrating so much?
If your Haier Washer is experiencing strong vibrations during spinning, there are a few potential causes. First, check that all transportation bolts have been removed. Next, ensure the appliance is on solid, level ground. Finally, verify that the machine load is correct and balanced.
What to do if my Haier HW100-B14979 Washer is not spinning?
If your Haier Washer is not spinning, check the machine load and laundry, and then run a spinning programme again.
Why is my Haier HW100-B14979 Washer not working?
If your Haier Washer isn't operating, first, check if the programme has been started. Ensure the door is properly closed and the machine is switched on. Verify the power supply and deactivate the child lock if it's activated.
How to fix drainage failure in Haier HW100-B14979 Washer?
To resolve drainage failure in your Haier Washer, first, check the drain hose for any blockages and clear them. Also, make sure that the drain hose end isn't higher than 100 cm above the floor.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Motor type | Beltless |
| Water fill | Cold |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Illumination color | Blue |
| Appliance placement | Freestanding |
| Drum capacity | 10 kg |
| Cycle time (max) | 238 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 69 dB |
| Noise level (wash) | - dB |
| Number of washing programs | 14 |
| Maximum washing temperature | 90 °C |
| Power plug type | Type F (CEE 7/4) |
| AC input voltage | 220 - 240 V |
| Energy efficiency scale | A to G |
| Power consumption (standby) | 0.45 W |
| Water consumption per cycle | 51 L |
| Energy consumption washing per cycle | 0.512 kWh |
| Package depth | 646 mm |
| Package width | 653 mm |
| Package height | 890 mm |
| Package weight | 82000 g |
Weight and Dimensions| Depth | 620 mm |
|---|---|
| Width | 590 mm |
| Height | 850 mm |
| Weight | 77000 g |
To Next Page
