Haier HW100-B14979S User Manual (English)

Questions and Answers:

M
Martha DavidsonAug 31, 2025
Why is my Haier HW100-B14979S not cleaning clothes properly?
- B
  Brandon HowardAug 31, 2025
  If you're experiencing a poor washing result with your Haier Washer, consider whether the degree of pollution matches the selected programme. Ensure that you are using sufficient detergent, without exceeding the maximum load. Also, make sure the laundry is evenly distributed in the drum. Select another programme. Choose the detergent according to the degree of pollution and according to manufacturer. Reduce loading. Loose the laundry.
C
christophersimonAug 30, 2025
What causes drainage failure in my Haier HW100-B14979S Washer?
- G
  Glenn SmithAug 30, 2025
  Drainage failure in your Haier Washer can occur if the drain hose is blocked or if the drain hose end is higher than 100 cm above the floor level. Unblock the drain hose and ensure that it is properly installed.
A
Anthony WangAug 29, 2025
Why is my Haier Washer constantly draining water?
- L
  luis96Aug 29, 2025
  If your Haier Washer is draining, it might be because the drain hose is installed at an incorrect height (below 80 cm) or the drain hose end is submerged in water. Ensure that the drain hose is properly installed and is not in water.
T
Timothy TaylorAug 28, 2025
What to do if my Haier HW100-B14979S shows CLR FLTR error?
- B
  Brian RoyAug 28, 2025
  If the Haier Washer displays 'CLR FLTR', it indicates a drainage error where water isn't fully drained within 6 minutes. You should clean the pump filter and check the drain hose installation. It may also mean the door is not shut properly, the water level was not reached after 12 minutes, or that the drain hose is self-syphoning. Make sure that the tap is fully opened and water pressure is normal. Check the drain hose installation. In the case of a water protective level error or a temperature sensor error, contact After sales service.
L
Lorraine LeAug 27, 2025
Why is my Haier HW100-B14979S Washer not spinning?
- V
  valenzuelajamesAug 27, 2025
  If your Haier Washer fails to spin, check the machine load and laundry, and then run a spinning program again.
M
Mary SantosAug 27, 2025
Why is there no water in my Haier HW100-B14979S Washer?
- N
  Nicole McfarlandAug 27, 2025
  If your Haier Washer isn't filling with water, start by checking the water tap to make sure it's open. Inspect the inlet hose for any kinks that might be blocking the water flow. Also, check that the water pressure is at least 0.03 MPa. Ensure the door is properly closed and that there isn't a water supply failure.
A
anthonymooreAug 25, 2025
Why is my Haier HW100-B14979S Washer vibrating so much?
- D
  Dr. Nicholas Richardson MDAug 26, 2025
  If your Haier Washer is experiencing strong vibrations during spinning, there are a few potential causes. First, check that all transportation bolts have been removed. Next, ensure the appliance is on solid, level ground. Finally, verify that the machine load is correct and balanced.
K
kevindavisAug 25, 2025
Why is my Haier Washer not working?
- K
  Kimberly MitchellAug 25, 2025
  If your Haier Washer isn't operating, several factors could be at play. First, ensure the program has actually been started. Then, check that the door is properly closed and the machine is switched on. A power failure could also be the culprit, so verify the power supply. Lastly, confirm that the child lock isn't activated.

Haier HW100-B14979S Specifications

General

Model	HW100-B14979S
Loading type	Front Load
Capacity	10 kg
Spin Speed	1400 RPM
Energy Rating	A+++
Energy efficiency class	A+++
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	70 kg
Color	White
Delay Start	Yes
Child Lock	Yes