I
IE I
onnection an use ste s
1.Read the user guide supplied with your AV devices and ensure that it has
S-Video connectors;
and then turn on the power of the AV
device;
4.Press the TV/AV button to set the video
input mode of the LCD-TV to SVIDEO
mode .
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
1. Connect the audio and Svideo cables
from the VCR's output jacks to the TV
2. Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner s manual.)
3
- To avoid picture noise (interference), leave an adequate distance between the
VCR an d TV
.
1
2
COMPONENT (If connected to SVIDEO,select the SV external
input source.)
3. Refer to the DVD player's manual for operating instructions.
I
To get better picture quality, connect a DVD player to the component
input ports as shown below.
Y Pb
Pr
8
To Next Page
Loading...
Need help?
General
