Menu Operations
EXCHANGE : Press V+ to display the menu as follows:
Press P+/- to select the item and then V+/- to adjust the channel and V+
P+/- to select FROM item, and then press
V+/- to adjust the channel number to 1; then Press P+/- to select TO item,
and V+/- to adjust the channel number to 9; press P+/- to select EXCHANGE item,
and then V+
MANUAL SEARCH : Press V+ to start to search the channel . The following menu
will display on the screen:
(If you select DOWN, the search will search the lower frequency channel and UP
will search the higher frequency channel)
2.COUNTRY: Press V+/- to select the country .
3. AUTO SEARCH : Auto search and save the channel .Press the V+ button to
start to search the channel and the following menu will appears on the screen:
Press V+/-
You could press MENU to stop the search.
NOTE: If you want to search the channels in L or L ' system, you need to set the sound
system to L in OSD
FROM : 1
TO : 9
EXCHA NGE
EXCHAN GE
MANUAL SEARCH
UPDOWN
AUTO SEARCH
YESNO
SKIP : If you want skip a channel , press V+/V- to select ON , and this
channel will be skip next time when you press P+/P- . But you can press
digits button to select the channel . If you want to restore the channel , select OFF.
AFC : Auto frequence control . Select ON to improve the image quality .
FINE TUNE :Press P+/P- to select FINE TUNE item in menu . Then , press V+/V-
button to adjust and improve the image quality .
Tuning Menu Options Continued
19
To Next Page
Loading...
Need help?
General
