M
3.Press button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
unction
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it
will add more light to dark parts of the picture and by decreasing the level ,it will
add more dark to light parts of the picture.
CONTRAST : Adjust the contrast of the picture . The image becomes higher as
the number increase.
SHARPNESS : Ad j u st t h e am o u n t of t h e det ai l en h an c e m en t , t h e im ag e
sharpness rises as the number increases (By increasing the level, it will show
cleaner and clearer images and by decreasing the level, it will make picture
smoother).
COLOUR : Press to adjust the colour
NOISE REDUCE: Adjust the quality of the picture by selecting OFF,LOW,MID,HIGH.
HUE : Adjust the tone of the picture . Appear and be adjusted only under NTSC
mode
COLOUR TEMP. : Press to select the colour temperature from WARM/NORMAL/
COLD .
H.POSITION : Picture horizontal adjust
V.POSITION : Picture vertical position adjust .
M
M
Sound can be adjusted for any input as follows:
1. Press ME and button until the following menu appears on
the screen
VOLUME
BALANCE
BASS
TREBLE
AUDIO MODE
AVL
AUDIO
50
50
50
50
VOICE
OFF
13
To Next Page
Loading...
Need help?
General
