24
Operation
(4) In sleeping set or modication state, if there is no operation
in 10 seconds, it will keep previous state, and the setting or
modication is invalid this time.
(5) Under sleeping and timer setting state, it will display
setting time respectively; when setting simultaneously, it will
display the prior executed time. When timer off is executed
rst, sleeping function will be cancelled and when sleeping
is executed rst, then timer off function will be operated after
that.
(6) Under function setting state, it will exit function setting state
by pressing
or key.
(7) If set sleeping time to 1 hour, it will display on the
interface.
(8) Sleeping time and timer on should not be set at the same
time.
(9) When setting sleeping function, press ON/OFF key to quit
sleeping set and turn off unit.
To Next Page
Loading...
