27
Operation
When lter cleaning icon is displayed, the icon will display
in function sequence. If lter cleaning icon is ashing, press
key to clear it.
Filter Cleaning
(1) Press key to enter function setting, then press
to choose energy saving, press
key again to conrm the
operation and display energy saving icon
. If energy
saving function has been set, the above operation will cancel
it.
(2)The energy saving default parameter are 23°C (74°F) (the
lowest temp. limit of cooling and dry mode) and 26°C (78°F)
(the highest temp. limit of heating mode). The temp. adjusting
range is 23°C-30°C (74°F-80°F) in cooling and dry mode, the
temp. adjusting range is 16°C-26°C (60°F-78°F) in heating
mode. If energy saving function is set, the indoor units will run
at the default temperature.
Note: Fresh Air unit has no energy saving function.
Energy Saving
To Next Page
Loading...
