Hakko Electronics 907-ESD User Manual

SOLDERING STATION
Instruction Manual
Thank you for purchasing the HAKKO 936 Soldering Station.
Please read this manual before operating the HAKKO 936.
Store the manual in a safe, easily accessible place for future reference.
Packing List/Specifications ……………………1
Precautions………………………………………2
Names of Parts …………………………………3
Setting up & Operating the HAKKO 936……3 4
Tip Care and Use
Maintenance
Calibrating the Iron Temperature…………5
Tips ………………………………………………6
Troubleshooting Guide…………………………7
Checking for breakage of the
heating element and cord assembly……8 9
Parts List
Station / Iron Holder………………………10
Iron…………………………………………11
Wiring Diagram…………………………………11
Table of Contents
®

Hakko Electronics 907-ESD Specifications

General

Type	Soldering Iron
ESD Safe	Yes
Tip to Ground Potential	< 2 mV
Heating Element	Ceramic
Voltage	24V
Cord Length	1.2 m
Temperature Range	200°C - 480°C
Tip Compatibility	T18 Series
Tip to Ground Resistance	<2Ω
Compatible Stations	FM-202, FM-203, FM-206

Summary

Instruction Manual

Packing List

Specifications

Details on power consumption, output voltage, temperature range, dimensions, and weight of the station and soldering irons.

Precautions and Safety Warnings

Setting Up and Operating the HAKKO 936

Connecting the Soldering Iron

Steps for connecting the soldering iron cord to the station and plugging into power.

Setting the Temperature Control

How to set and lock the desired temperature using the control knob and hex wrench.

Soldering Tip Care and Usage

Station and Tip Maintenance

Calibrating the Iron Temperature

Steps to recalibrate the iron temperature using a thermometer and adjustment screw.

Soldering Tip Adjustment Guide

Troubleshooting Common Problems

Heater Lamp Not Lighting Up

Diagnosing issues when the heater lamp does not illuminate, checking power and fuse.

Tip Not Heating Up

Troubleshooting when the lamp is on but the tip remains cold, checking cord and element.

Tip Seized or Swollen

Checking Heating Element and Cord Assembly

Broken Heating Element Diagnosis

Broken Soldering Iron Cord Testing