Hakko Electronics 937 - Packing List

1
Card
Coupling Band
1. PACKING LIST
Please check the contents of the HAKKO 937 package and
confirm that all the items listed below are included.
HAKKO 937 Station ................................................ 1
Card ........................................................................1
Soldering Iron (HAKKO 900 (S), 907 or 908) ......... 1
HAKKO Iron Holder (With Cleaning Sponge) ......... 1
Coupling Band ........................................................1
Instruction Manual .................................................. 1
Cleaning sponge
Iron holder
Iron/907, 908
Iron/900 (S)
Station
900S-ESD
24V AC-50W
Under 2 Ω
Under 2 mV
Ceramic heater
1.2 m (4 ft.)
176 mm
(7 in.)
25 g
(0.06 lbs.)
908-ESD
200 mm
(7.9 in.)
54 g
(0.12 lbs.)
907-ESD
190 mm
(7.5 in.)
44 g
(0.09 lbs.)
2. SPECIFICATIONS
Name
Power Consumption
HAKKO 937
60W
Part Name
Output Voltage
Temperature Range
Dimensions
Weight (W/O Cord)
937 Station ESD
24V AC
200~480°C/400~899°F
120 (W) × 93 (H) × 140 (D)mm
(4.7 × 3.7 × 5.5 in.)
1,300 g (2.9 lbs.)
Power Consumption
Tip to Ground Resistance
Tip to Ground Potential
Heating Element
Cord Assembly
Total Length (w/o Cord)
Weight (w/o Cord)
●Soldering Iron●Station
• The tip temperature was measured using HAKKO 191 thermometer.
• Specifications and design are subject to change without notice.