Hakko Electronics FR-702 - Page 33

32
● Error Alarm
● Ready Alarm
In the buzzer sound setting mode, which sets whether to sound the buzzer when a
error occurs.
When the set temperature alert setting mode is on, the buzzer sounds if you reached
the usable temperature.
1.
Move the cursor to select “ Error Alarm ”.
After selecting, press <ENT>.
2. ON and OFF will be switched alternately
if you press the <↑> or <↓> button.
3. Return to parameter setting display if you
press the <ENT> button after setting.
1. Move the cursor to select “ Ready Alarm ”.
After selecting, press <ENT>.
2. ON and OFF will be switched alternately
if you press the <↑> or <↓> button.
3. Return to parameter setting display if you
press the <ENT> button after setting.
<↑> <↓> <ENT>
S l e e p T emp
L o w Temp
E r r o r A l arm
200ﾟ C
150ﾟ C
ON
<↑> <↓> <ENT>
E r r o r A l arm S e t
OFF
<↑> <↓> <ENT>
L o w Temp
E r r o r A l arm
Read y A l arm
150ﾟ C
OFF
ON
<↑> <↓> <ENT>
Read y A l arm S e t
O N
OFF