10 © 2011 HAMILTON – INSTRUCTION MANUAL
3. Instructions for use
Adjusting the daily alarm
. Pull the crown out to position (p2). The time display
ashes.
. Turn the crown to adjust the values.
. Press button
B
to switch between hours and minutes.
. Push the crown back to position (p1). The alarm is
automatically activated.
Note: A short press on a button or on the crown imme-
diately stops the ringtone.
3.11 Testing the alarm ringtone
A long press on button B sounds the alarm ringtone.
This has no inuence on the activation or deactivation
of the alarm.
Note: The same manipulation is applicable to the
reminder alarm (agenda) “AG”.
3.12 Reminder alarm “AG” (agenda)
When the “AL” display is shown, a short press of button
B
displays the reminder alarm “AG” and indicates the hours,
the minutes and the mode of activation of the alarm
(On-O) in alternation with the date, month and year.
Adjusting the “AG” alarm
. Pull the crown out to position (p2). The hours display
ashes.
. Turn the crown to adjust the values.
. Press button
B
to switch between hours and minutes,
date, month and year.
. Push the crown back to position (p1). The alarm is
automatically activated .
. A long press on button
A
activates or deactivates the
alarm and a beep sounds.