© 2011 HAMILTON – INSTRUCTION MANUAL 15
4. Pilot functions
4.3 “Logbook” function
Display and selection of block , , etc.
. In position (p) turn the crown to access the display
“Lo Run”.
. A short press of button A or B allows selection and
scrolling in ascending or descending order of the logs
of each block, and of the total “to” made up by blocks
, , etc.
Restoration of data
Starting with the block or total selected, each short press
on button
C
displays the results of each block or the
total, in hours and minutes.
Example:
Starting time of block Time of rst takeo
Time of last landing Ending time of block
Flight time in “VFR” mode Flight time in “IFR” mode
Flight time Total ight + waiting time
Number of block cycles