Hamilton KHAKI FLIGHT TIMER - Pilot takeoff logging; Pilot landing logging; Pilot stop block time

14 © 2011 HAMILTON – INSTRUCTION MANUAL
4. Pilot functions
Takeo
. A short press of button C starts the logging of the
rst takeo. The display indicates “bL TK oF”.
. A short press of button A switches from “VFR” mode
to “IFR” mode, and vice versa.
. A short press of button B briey displays the number
of cycles, after which the display returns to “VFR” or
“IFR”.
In the example, no landing has yet been made so the
number of cycles displayed is 00.
Landing
. A short press of button C upon landing stops the
timing and memorizes the rst ight time. the display
indicates “bL Lnd”, the block number and the ight
time, which ashes.
. A short press of button B briey displays the number
of cycles, after which the display returns to “bL Lnd”.
In the example, the rst landing has been made so
the number of cycles displayed is 01.
Stopping the block time
A double press on button C stops the timing of the rst
block time and memorizes it. The display indicates “bL
CLo”, the block number and the time elapsed between
block 01, 02, etc.