© 2011 HAMILTON – INSTRUCTION MANUAL 17
4. Pilot functions
4.5 Temperature “ISA”
This feature allows display of the temperature in °F or °C,
starting from a desired altitude in feet “Ft” or in meters
“m”, following the “ISA” model of atmospheric standards.
Display of the temperature “ISA”
. In position (p1) turn the crown to access the “ISA”
display. The indications of altitude and temperature
display alternately.
. A short press of button A or B allows increasing
or decreasing the altitude in steps of 500 feet or 150
meters.
Selection of units of measurement
. When the “ISA” display is shown, pull the crown out
to position (p2). The display ashes.
. A short press of button A changes the altitude unit.
. A short press of button B changes the temperature
unit.
. Push the crown back to position (p1) to conrm the
settings.