© 2011 HAMILTON – INSTRUCTION MANUAL 5
3.1 General principle of manipulations
The display and adjustment of the various analog or
digital functions is accomplished by turning the crown
P when it is in position (p) or (p).
Selection of functions
Adjustment of data
Crown
The crown P has three functioning positions
Pushed in Neutral Pulled out
Buttons
The watch has three buttons,
A
,
B
and
C
, which allow
activation, setting or adjustment of the selected func-
tions. According to the desired action, a short press, a
double short press or a long press is necessary.
Short press:
Double short press:
Long press ( to sec.):
3. Instructions for use